Update Galaxy S3 I9300 to Leaked Android 4.2.1 XXUFMB3 Jelly Bean Official Firmware and Rooting ~ Ra Win

Update Galaxy S3 I9300 to Leaked Android 4.2.1 XXUFMB3 Jelly Bean Official Firmware [How to Install]

Galaxy S3 I9300 users are in for a special treat, as the first official test firmware based on Android 4.2.1 Jelly Bean has been leaked online by SamMobile. Though the beta firmware is not yet officially available over Samsung KIES or Over-The-Air (OTA), discerning users can try a hand on the latest Jelly Bean firmware using the manual installation method with this guide.

As this is a private beta firmware for developers, interested users can get a glimpse of what to expect from Samsung in their upcoming software updates. The installation of this firmware makes use of ODIN flash tool and hence installation of ClockworkMod (CWM) recovery is only optional (required for installing third-party root apps, custom ROMs and latest system tweaks).

With due credit to XDA Developers forum member Saturn, the leaked official firmware, Android 4.2.1 XXUFMB3, brings a host of feature enhancements that are listed below:

Based on the popular Android 4.2.1 JOP40D baseband firmware
New Android 4.2.1 Lockscreen with enhanced Ripple Effect and widgets
Daydream feature accessible from Settings > Display
New Additions to the Notification Center
More actionable Notifications
Improved Voice Command feature

Android 4.2.1 XXUFMB3 Firmware Details

Update Galaxy S3 I9300 to Android 4.2.1 Jelly Bean with XXUFMB3 Official Test Firmware [How to Install]

Android Version: 4.2.1 - JOP40D (Jelly Bean)
PDA: I9300XXUFMB3
CSC: I9300OJKFMB3
MODEM: N/A
Region: Middle East
Carrier: Unbranded
Changelist: 171637
Build Date: 19th February 2013

NOTE: As this is an unbranded firmware, it can be installed on any Galaxy S3 I9300 (irrespective of the device's carrier). This, despite the fact that the firmware is officially meant for Middle East region only.

SamMobile assures that they have fully tested the firmware and it should work as good as any other official firmware. As this is a private test firmware, it may harbour a few untested bugs or broken features. However, any such bugs are expected to be fixed in the upcoming official public release.

Key Points to Note

Android 4.2.1 XXUFMB3 official test firmware and the instructions given in this guide are applicable to the international variant Galaxy S3 I9300 model only. It will not work on any other device. Verify your device's model number by navigating to Settings > About Phone.
Verify that the correct USB drivers are installed for your Galaxy S3 I9300 on computer (download USB drivers).
Back up important data and settings on your phone by using one of the recommended custom recovery tools such as ClockworkMod (CWM) or TWRP, as it creates a complete image of the existing phone setup.
Make sure that USB Debugging mode is enabled on the phone by navigating to Settings > Developer Options (if the device is running Android 4.0 or later) or go to Settings > Applications > Development (if the phone is running Android 2.3 or earlier).
Ensure that your phone has at least 85 percent battery charge to prevent unexpected device shutdown (due to battery drain) while flashing the official test firmware.
Verify that the device is factory unlocked and not locked to a specific carrier before proceeding with the firmware installation.
The instructions provided in this guide are meant for reference purpose only. IBTimes UK will not be held liable if you damage or brick the device during or after firmware installation. Users must proceed at their own risk.

How to Update Galaxy S3 I9300 to Android 4.2.1 Jelly Bean with Leaked XXUFMB3 Official Test Firmware

Step 1 - Download Android 4.2.1 I9300XXUFMB3 official test firmware for Galaxy S3 on the computer and extract the zip file.

Step 2 - Download ODIN v1.85 which is needed to install Android 4.2.1 XXUFMB3 firmware on Samsung Galaxy S3 I9300.

Step 3 - Power off your phone and boot into Download Mode. To do so, press and hold Volume Down and Home buttons together, and then tapPower button until the construction Android robot icon with a triangleappears on screen. Hit the Power button again to entry into Download Mode.

Step 4 - Launch ODIN on computer and connect your phone to it while your phone is still in Download Mode.

Step 5 - When the phone connects successfully, one of the ID: COM boxes turns yellow with the corresponding COM port number. This step may take some time. So, do not interrupt the process.

Step 6 - Choose the files that need to be flashed or installed on your phone, which can be found among the extracted files in Step 1.

Click the 'PDA' button and choose the file named 'CODE' or '.md5'.
Tap the 'Phone' button and choose the file named 'MODEM'. Ignore this step if there is no such file.
Hit the 'CSC' button and choose the file named 'CSC'. Ignore this step if such file is missing.
Click the 'PIT' button and choose the .pit file. Ignore this step if such file is absent.

Step 7 - In ODIN, enable Auto Reboot and F. Reset Time options. In case ofRe-Partition option, check it ONLY if you chose a .pit file in the previous step.

Step 8 - Hit the Start button in ODIN and the firmware Installation process begins. It would take just a few minutes to complete.

Step 9 - Once the firmware installation is done, your phone will reboot. When the home screen appears, unplug the USB cable to disconnect your phone from computer.

Your Samsung Galaxy S3 is now successfully updated with Android 4.2.1 XXUFMB3 official test firmware. Go to Settings > About Phone to verify the firmware version installed.

How to Root Galaxy S3 I9300 Running on Leaked Android 4.2.1 XXUFMB3 Jelly Bean Official Firmware

Step 1 - Download CF-Root package for Galaxy S3 on your computer and extract the zip file to desktop.

Step 2 - Download ODIN v1.85 which is required to root Android 4.2.1 XXUFMB3 on Samsung Galaxy S3 I9300.

Step 3 - Turn off the phone and boot it into Download Mode. To do so, press and hold Volume Down and Home buttons together, and then tap the Powerbutton until the construction Android robot icon with a triangle appears on screen. Hit Power button again to confirm entry into Download Mode.

Step 4 - Launch ODIN on the computer and connect your phone to it, when the phone is still in Download Mode.

Step 5 - When the phone connects successfully, one of the ID:COM boxes indicates yellow with the corresponding COM port number. This step may be time consuming. So, leave it alone.

Step 6 - Choose the root package file that must be flashed or installed on your phone, which can be found among the extracted files in Step 1.

Click the 'PDA' button and choose the file CF-Root-SGS3-v6.4.tar.

Step 7 - In ODIN, enable Auto Reboot and F. Reset Time options and leave all other options at their default settings.

Step 8 - Hit the Start button in ODIN and the firmware installation process will begin. It should take just a few minutes to complete.

Step 9 - Once the firmware installation is complete, the phone will reboot. When the home screen appears, just disconnect your phone from computer.

Samsung Galaxy S3 I9300 is now rooted on Android 4.2.1 XXUFMB3 official test firmware. Check for the Superuser app in your apps list to verify if root is installed correctly.