Android 4.1.2 ZCALL6 Firmware Details:
PDA: I8190NZCALL6CSC: I8190NCHNALL6
Version: 4.1.2
Download
How to update Galaxy S3 Mini I8190N to Jelly Bean XXALL6 Android 4.1.2 Official Firmware
- Extract Firmware zip file that you downloaded already from above link, you will get a .tar file and some other files.
- Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
- Power off your smartphone. Wait 5-6 seconds for vibration to confirm complete switch off.
- Now, put the Galaxy S3 Mini I8190N in Download Mode by pressing and holding Volume Down, Home and Power button until Samsung Galaxy logo appears in phone screen. Wait few seconds and your phone will be in download mode.
- Now run Odin3 v3.07.exe (see Step 2) as an Administrator because Admin privileges is required to complete the process smoothly.
- Now connect your Galaxy S3 Mini I8190N with your PC using USB cable. A message will arrive under Odin’s message box in the bottom left saying “Added!!”. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should then reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
- Select these files from I8190NXXALL6 folder [see Step 1] in Odin at respective buttons:
- Click the PDA Button, and select the .tar.md5 file here with *code* appearing in its name
- Click the Phone Button, and select file with *modem* in its name (leave if there is no such file)
- Click the CSC Button, and select file with *csc* in its name (leave if there is no such file)
- Click the PIT Button, and select the .pit file. Use only if you got it while extracting in step 1 above, otherwise ignore it.
- In Odin window, make sure Auto Reboot and F. Reset Time checkboxes are selected. Also, make sure that Re-Partition checkbox is selected, only if you are using a .pit file (see Step 7.4).
- Double check everything that we mentioned in Step 7 & Step 8 above. Now, once satisfied hit the START button to begin the flashing process.
- Once flashing completed, your phone will reboot automatically and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can then unplug the USB cable to disconnect your device from computer.
